The main cause of blockages is foreign objects that get into the drainage system along with clothes (loose change from pockets, bra bones, small pieces of clothing). Blockages can also form naturally, as a result of the accumulation of tiny particles of lint, animal hair in the filter and other parts of the drainage system over the years of using the washing machine.

Why does a clog occur in an LG washing machine?

LG washing machines are in great demand among consumers due to their reliability. But sometimes they break down. The most common problem with this equipment is clogging. If the problem is in the drain filter, then you can fix it yourself. Otherwise, it is better to call a technician right away

All LG washing machine models become clogged for several reasons:

• Clogging of the filtration system,
• Problems with the pipe,
• Small items of clothing getting into the pump, causing the impeller to become blocked,
• Damage to the drain pan,
• Blockage in the drain hose,
• Narrowing of the lumen of the sewer system.

A blockage can form immediately when a foreign object gets in (buttons, coins, toothpicks, hairpins, toys, jewellery, etc.). It can also form gradually, when wool, fluff from clothes, hair accumulate in the drainage system and at some point, block it. The malfunction is manifested by a slow drain of water, or the washing machine does not remove it at all, the equipment shows program failures on the display. Due to the blockage, the unit does not switch to the "rinse" and "spin" modes after washing, it is blocked and turns off at this moment.

How to clear a blockage in an LG washing machine?

In a washing machine, water flows from the tank into a rubber pipe with a corrugation. It is connected to a cleaning filter, on which all the dirt from the drum and foreign objects accumulate. From the pipe, water after washing moves to the impeller of the pump, and then through the drain hose enters the sewer system. A blockage in a washing machine can form in any part of the system. You can clean the filter on the drain and inspect the pump yourself.

To do this you need:

• Open the plastic plug on the bottom right of the machine that covers the filter. Simply press the provided latches and remove the flap.
• Unscrew the drain filter counterclockwise and remove it. It is essential to place a container or a rag underneath it, as water will leak.
• Remove all foreign objects and wipe with a sponge.
• If no foreign objects are found in the drain of the washing machine, then it is necessary to disconnect the machine from the sewer, water supply. Tilt it to drain the water completely.
• The machine should be moved to the middle of the room and placed on its side. Through the bottom of the device, you can get to the pump and the pipe near it, check for blockages in them.
• Be sure to clean the drain hose using a cable and brush.

If these actions do not help, the machine does not want to drain water after assembly, call a technician. Perhaps the problem is in the drainage system, it needs to be cleaned completely or the pump and drain hose need to be replaced. When repairing, the technician must disconnect the hose, all inlet and outlet pipes, check the pump and impeller. When checking and cleaning the entire drainage system, a lot of work is required.

How to prevent blockages in the future?

To prevent the problem from occurring in the future, it is necessary to carefully inspect the pockets before washing. Items with buttons and zippers are preferably washed buttoned. Small items, bras, clothes with small decor must be washed in special bags. Also, experts recommend cleaning the system once a month, installing a filtration system on the supply pipe when connecting the equipment. For cleaning, it is worth buying special products. They must be poured into the washing tray instead of powder, turn on the washing mode at a temperature of 90 degrees. Due to the hot water, not only the blockage is eliminated, but also possible Mold and scale.

Repairing an LG washing machine is long, troublesome and, without the proper skills, not always successful. It is better to entrust such work to the specialists of our service center, who will do everything at the highest level. Only in this case can you be sure that everything is done correctly, and the machine will serve for many years.