Affordable, Reliable

LG Washing machine service center

In case of complaints about the operation of equipment for washing clothes. Should not hesitate to call a specialist. If you need a quick and high-quality LG washing machine service in Chennai, you can order them on our website. Using the convenient form of calling the master, you can count on his arrival on the day of application. We carry out repairs of LG washing machines at the customer's home at a favourable price for the customer, while the cost of calling a specialist is free. You can get acquainted with the approximate prices for the maintenance of washing units on our website.

LG Washing machine repair in Chennai

LG washing machine controlled electronically. In addition, the equipment has many complex mechanical components interconnected with each other. Accordingly, the failure of one of the nodes can lead to the fault of the other. In addition, the units of a single manufacturer have their own design features. The LG washing machine is no exception in this sense, and its repair requires special knowledge and experience with this particular model.

Our service center has qualified specialists who have been repairing LG washing machines. The master performs diagnostics of the device. This approach is the most justified and correct from any point of view because the same external factor can be the result of several possible causes. To accurately identify the assembly or part that led to the malfunction, the LG washing machine repairman conducts diagnostics. Errors are eliminated and time for repair is significantly saved.

Where can I service my LG washing machine?

Our service center offers affordable costs for troubleshooting LG washing machines. We carry out LG washing machine service in Chennai at home in case of repair of any complexity in the shortest possible time. It takes a specialist from 15 minutes to 24 hours to eliminate problems. After completing the LG washing machine repair service, the mechanic will offer our scheduled maintenance services to prevent future breakdowns. In addition, he will give you valuable advice on the operation of equipment.

LG washing machine error codes

The error code is displayed on the LED or LCD display on the LG washing machine control panel. Codes do not depend on the type of SMA engine (vehicle washing machine) and do not indicate a specific part requiring repair or replacement. Error codes report a failure on a specific site. Below will be given a decoding of the errors of the LG washing machine, a possible reason for their appearance and instructions for elimination.

dE error code. Error LG washing machine arising when the «Start » button is pressed if the door is open or not completely slammed. Elimination Options:

• Reopen and close the door to a characteristic click. Make sure the LG washing machine slams shut.
• Check the door handle for damage or wear. Pay attention to the tongue (hook) - it should spring and not fall. Clean it from possible blockages.
• If previous actions did not produce results and the error did not disappear, you should contact the LG service center to replace the door lock.

CL Error Code. This code indicates that blocking from children is included. In this case, the washing machine does not respond to pressing buttons and does not open. In order to turn off the mode, you must press a certain key combination on the LG washing machine. This combination can be different for different models of LG washing machines. To find out exactly which combination suits your model, it will be optimal to see the information in the User Guide.

If this is not possible, then you can try to select a key combination from among the most common:

• «Pre-washing » + «Super rinse »
• «Extra wash » + «Intensive wash »
• «Temperature » + Option key.

Ie Error Code. It occurs if the water has not filled the drum in a timely manner. In machines of the previous generation, display without display will appear on lights. Before looking for a reason in the washing machine, you need to check the water pressure in the apartment. If the water pressure is sufficient, then:

• Check if the water is included in the washing machine. Perhaps blocked the tap.
• Check the flank for bending and holes.
• Check the pressure in the filler hose. Unscrew the hose and turn on the water before placing the bucket.
• Remove the filter from the hose of the LG washing machine and rinse under the water stream.

If the above actions did not help, you should contact the LG service center. A washing machine may require the replacement of a water sensor or a water bay valve.

Code error RE. This is a mistake of a water level sensor (pressor). Washing machines make an RE error if the tank has not been filled to the required level for a certain time, or water filling occurred faster than in 4 minutes. Actions are similar to IE error:

• First you need to check the water pressure in the apartment.
• Next, we check the hose for bending, holes and clogs.
• We contact the LG service center to replace the water sensor, if necessary.

FE Error Code call overflow error. The code is displayed when the maximum water level in the tank is reached. In this case, you must:

• Check for too much foam in the washing machine. This can happen if an inappropriate detergent is used.
• Next, disconnect the pressor's hose, check it for clogging and clean it.
• To study the valve of the bay of water, perhaps an outsider accidentally hit it, which interferes with the closure.
• Then check the contacts and wires on the pressure sensor - they can be oxidized or damaged.
• If the listed actions did not help, then you should contact the LG service center to check the electronic controller, level sensor or water bay valve.

Oe error code washing machines are displayed when the machine cannot drain the water:

• First of all, it is necessary to check whether there was a malfunction in the work of the electric controller. Try to fix the situation when the LG washing machine shows an error by restarting it. Turn off the washing machine from the network for 10-15 minutes, then turn it on again and continue washing.
• It is also necessary to check the condition of the drain hose, perhaps it is compressed, and it needs to be straightened. As a result, the LG washing machine shows OE error for this reason.
• Then we check the hose for clogging. If there is a blockage, the hose should be disconnected from the drain system and either washed under a stream of hot water or cleaned with steel wire.
• Next, check for a drain filter block. It's easy to remove the blockage: for this we open the lower panel of the washing machine and twist the part counterclockwise. The filter itself is washed under a stream of water. After flushing, set the filter to place.
• It is also necessary to check for a blockage of the sewer in the apartment. To do this, open all the taps and watch how quickly the water flows in the sink and in the bathroom.
• If the listed actions did not help, it is necessary to conduct a comprehensive diagnosis of the washing machine. To do this, it is better to contact the LG service center.

LE Error Code characteristic of LG washing machines with direct drive Direct Drive. Possible causes of occurrence:

• The door is tightly closed. The unlocked door does not close the chain and reports that launching the program is not possible. This leads to an error. Try reopening and closing the door of the LG washing machine to a characteristic click.
• Failure in the control unit. A failure can occur due to power surges or other reasons indicating overloading of the equipment. To get rid of the LE error, turn off the LG washing machine for about a quarter of an hour and then turn it on again.
• Crossing clothes in the drum. The advantage leads to an LE error while pushing things away. The machine cannot correctly distribute things, and the resulting computer overloads the engine. To resume the rotation of the drum and remove the error, you need to pull out some of the things and squeeze the laundry in two stages.
• Low voltage on the network. The washing machine stops with an LE error if the voltage in the network is below normal. You need to wait until the problems are eliminated and the voltage returns to normal, then re-insert the machine.
• Block the drum with foreign objects. An outsider can be a torn button from things, keys or keychain that they forgot to get out of your pocket in advance. They can get between the drum and the body. Turn off the washing machine and try to scroll through the drum with your hand. If it does not rotate, then use the tweezers to remove a foreign object that blocks the rotation of the drum.

If you can't fix the error yourself, it's better to contact the LG service center.

Ue Error code you will collide if the LG washing machine detects an unbalanced load due to the uneven distribution of things:

• Make sure there are enough things in the device.
• Redistribute things in the drum of the washing machine.

SE Error Code indicates that washing machine cannot spin loaded underwear. Often occurs due to overload. General recommendation in this case – washing things in several stages. If the error does not disappear, you should contact the LG service center.

Error with PF code means a power failure:

• Make sure that the power cord is properly secured and connected.
• The LG washing machine should not be connected to a multifunctional connector.
• Check the wiring and connections.
• Check the inclusion indicator.

SE Error Code appears on washing machines with the full drive of Direct Drive and means that the control system cannot determine the rotation of the motor. Diagnostic required at the service center.

TE Error Code determined by the error of the water heating sensor. Requires access to the LG service center and the probable replacement of the temperature sensor (thermistor or thermostor).

E3 Error Code highlighted very rarely and means that the washing machine cannot determine the presence of things in the drum due to their small number. It is required to restart the washing machine.

Error with code E1 will be highlighted if there is a water leak into the pallet due to the depressurization of the tank or hoses. If there is water in the pan, carefully inspect the nozzle, tank or cuff of the hatch for damage.

AE Error Code similar in actions to code E1. Appears only in LG washing machines with AquaStop. The only difference is that if the error is highlighted and there is no water in the pan, then it is necessary to check the float, it could shift due to vibration or foreign objects could fall under it.

In all errors, except for the PE error, you must first make sure that there was no malfunction in the power controller due to the voltage drop. You need to turn off the machine, wait 10-15 minutes and start again.

LG washing machines Service & fault